Showing posts with label cherry. Show all posts
Showing posts with label cherry. Show all posts
Monday, January 26, 2015
Cherry Mobile Thunder firmware stock rom to unbrick your phone
Hey,
I got a new firmware, this is for Cherry Mobile Thunder, this is not for Thunder 2.0, this is for Cherry Mobile Thunder only. This is flashable via Flashtool. There is a tutorial below that you can follow. Hope you fix your phone:)
Firmware Here -->Cherry Mobile Thunder
"Extract the files to your desired folder" See picture below"
"If you encounter error in flashtool, use different version of it."
Installing Driver
First try the Alternative Driver, which is the AutoInstaller. Just open the install.bat then it will automatically install the driver. Then proceed to flashing. If it did not work then proceed with VCOM driver that you had downloaded. Then install it manually follow the guide below.
Video Reference using Driver Auto Installer (watch in HD)
When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Flashing your phone (please watch in HD)
Flashing
Video Reference Using FlashTool version 5.xxx (watch in HD)
3. After you load the file, press F9 or Press Download to Flash your Phone.
"Hard reset your phone after flashing"
I hope this tutorial help you. Please drop a comment if something is not clear to you.
Read more »
I got a new firmware, this is for Cherry Mobile Thunder, this is not for Thunder 2.0, this is for Cherry Mobile Thunder only. This is flashable via Flashtool. There is a tutorial below that you can follow. Hope you fix your phone:)
Firmware Here -->Cherry Mobile Thunder
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
SPFlashTool --> SPFlashTool
SPFlashTool --> SPFlashTool
SPFlashTool --> LatestVersion
"Extract the files to your desired folder" See picture below"
"If you encounter error in flashtool, use different version of it."
Installing Driver
First try the Alternative Driver, which is the AutoInstaller. Just open the install.bat then it will automatically install the driver. Then proceed to flashing. If it did not work then proceed with VCOM driver that you had downloaded. Then install it manually follow the guide below.
Video Reference using Driver Auto Installer (watch in HD)
When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Installing VCOM Driver (please watch in HD)
Video Flashing your phone (please watch in HD)
Flashing
1. Launch FlashTool
2. Click on Scatter-Loading, and load your scatter file. (see example below with loaded file in Flash Tool
Video Reference Using FlashTool version 5.xxx (watch in HD)
3. After you load the file, press F9 or Press Download to Flash your Phone.
4. If Download is not possible, you can press Firmware Upgrade.
5. After you press Download or Firmware Upgrade re-insert your battery and connect your Phone to the PC. Press Volume Down or Volume Up while connecting to PC.
"Hard reset your phone after flashing"
I hope this tutorial help you. Please drop a comment if something is not clear to you.
Cherry Mobile Skyfire firmware stock rom to unbrick your phone
Yey!,
You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
Firmware Here -->Cherry Mobile Skyfire
"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder" See picture below"
"If you encounter error in flashtool, use different version of it."
Installing Driver
First try the Alternative Driver, which is the AutoInstaller. Just open the install.bat then it will automatically install the driver. Then proceed to flashing. If it did not work then proceed with VCOM driver that you had downloaded. Then install it manually follow the guide below.
Video Reference using Driver Auto Installer (watch in HD)
When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Flashing your phone (please watch in HD)
Flashing
Video Reference Using FlashTool version 5.xxx (watch in HD)
3. After you load the file, press F9 or Press Download to Flash your Phone.
I hope this tutorial help you. Please drop a comment if something is not clear to you.
Read more »
This firmware is for Cherry Mobile Skyfire only (MTK6577). This is not compatible with Skyfire 2.0. Because Skyfire 2.0 has a Qualcomm SoC.
You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
Firmware Here -->Cherry Mobile Skyfire
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
Alternative Driver --> AutoInstaller
SPFlashTool --> SPFlashTool
SPFlashTool --> LatestVersion
"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder" See picture below"
"If you encounter error in flashtool, use different version of it."
Installing Driver
First try the Alternative Driver, which is the AutoInstaller. Just open the install.bat then it will automatically install the driver. Then proceed to flashing. If it did not work then proceed with VCOM driver that you had downloaded. Then install it manually follow the guide below.
Video Reference using Driver Auto Installer (watch in HD)
When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Installing VCOM Driver (please watch in HD)
Video Flashing your phone (please watch in HD)
"Your Phone must be turned off when you are ready to connect and flash your phone"
Flashing
1. Launch FlashTool
2. Click on Scatter-Loading, and load your scatter file. (see example below with loaded file in Flash Tool
Video Reference Using FlashTool version 5.xxx (watch in HD)
3. After you load the file, press F9 or Press Download to Flash your Phone.
4. If Download is not possible, you can press Firmware Upgrade.
5. After you press Download or Firmware Upgrade re-insert your battery and connect your Phone to the PC. Press Volume Down or Volume Up while connecting to PC.
Some workarounds:
Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Older Version of FlashTool
- Load the scatter file
- Click in Format (a new menu will popup)
- Make sure that you select Format whole flash except bootloader then press OK
- Connect your phone in bootmode (Turn off your device then hold Volume UP or VOLUME DOWN then insert USB)
- It should detect your phone and continue to flash.
- Then Click Download to fully flash your phone.
- Hard Reset your phone after flashing.
- Load the scatter file
- Choose Format + Download (Underneath Scatter-loading file)
- Then Click Download and wait until it is done flashing
For Invalid IMEI:Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
"Hard reset your phone after flashing"
I hope this tutorial help you. Please drop a comment if something is not clear to you.
Saturday, January 24, 2015
Cherry Mobile Emerald Stock ROM Firmware to unbrick your phone
Im done uploading the firmware for Cherry Mobile Emerald, this is version 4.2.2 Jellybean not the Kitkat version. You can however update in Kitkat after recovering your phone. This is flashable via SP Flash Tool. You can download the SP Flash Tool in the right corner of my blog which is the tool section.
Firmware Here --> CM Emerald
VCOM Driver --> PDANET
Alternative Driver --> AutoInstaller
SPFlashTool --> SPFlashTool
"Extract the files to your desired folder"
"If the SPFlashtool did not work you can try other version of it"
You can fix the following issue with this firmware:
1. Bootloop
2. Stuck in Logo
3. Password Removal (alternative way)
4. Gmail Account Removal (alternative way)
5. Damage SystemUI
6. Forced Close Apps
Installing Driver
First try the Alternative Driver, which is the AutoInstaller. Just open the install.bat then it will automatically install the driver. Then proceed to flashing. If it did not work then proceed with VCOM driver that you had downloaded. Then install it manually follow the guide below.
Reference Video Installing the Driver using AutoInstaller (watch it in HD)
When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver. You can connect your phone without battery in it.
2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Reference Video Installing the Driver (watch it in HD)
Reference Video Flashing your phone (watch it in HD)
"You can skip installing driver if you already have it"
IMPORTANT: After flashing it may ask to upgrade your touch panel, After pressing YES, DO NOT EVER TOUCH THE TOUCH PANEL, TOUCH PANEL WILL NOT WORK IF YOU PRESS THE TOUCH PANEL ACCIDENTALLY. As other tried to flash their phone and experienced this kind of problem.
Flashing
1. Launch FlashTool
2. Click on Scatter-Loading, and load your scatter file. (see example below with loaded file in Flash Tool
Reference Video using Flashtool version 5.xxx (watch it in HD)
3. After you load the file, press F9 or Press Download to Flash your Phone.
4. If Download it is not possible, you can press Firmware Upgrade. If Firmware Upgrade is not possible then Press Format, make sure that you select except bootloader then press OK. Then connect your phone. Press VOLUME UP and VOLUME DOWN and insert your USB Cable. Formatting will be quick it will only take a second.
I hope this tutorial help you. Please drop a comment if something is not clear to you.
Read more »
Firmware Here --> CM Emerald
VCOM Driver --> PDANET
Alternative Driver --> AutoInstaller
SPFlashTool --> SPFlashTool
"Extract the files to your desired folder"
"If the SPFlashtool did not work you can try other version of it"
You can fix the following issue with this firmware:
1. Bootloop
2. Stuck in Logo
3. Password Removal (alternative way)
4. Gmail Account Removal (alternative way)
5. Damage SystemUI
6. Forced Close Apps
Installing Driver
First try the Alternative Driver, which is the AutoInstaller. Just open the install.bat then it will automatically install the driver. Then proceed to flashing. If it did not work then proceed with VCOM driver that you had downloaded. Then install it manually follow the guide below.
Reference Video Installing the Driver using AutoInstaller (watch it in HD)
When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver. You can connect your phone without battery in it.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Reference Video Installing the Driver (watch it in HD)
Reference Video Flashing your phone (watch it in HD)
"You can skip installing driver if you already have it"
IMPORTANT: After flashing it may ask to upgrade your touch panel, After pressing YES, DO NOT EVER TOUCH THE TOUCH PANEL, TOUCH PANEL WILL NOT WORK IF YOU PRESS THE TOUCH PANEL ACCIDENTALLY. As other tried to flash their phone and experienced this kind of problem.
Flashing
1. Launch FlashTool
2. Click on Scatter-Loading, and load your scatter file. (see example below with loaded file in Flash Tool
3. After you load the file, press F9 or Press Download to Flash your Phone.
4. If Download it is not possible, you can press Firmware Upgrade. If Firmware Upgrade is not possible then Press Format, make sure that you select except bootloader then press OK. Then connect your phone. Press VOLUME UP and VOLUME DOWN and insert your USB Cable. Formatting will be quick it will only take a second.
5. Proceed fully flashing your phone. Press Download After you press Download re-insert your battery and connect your Phone to the PC. Press Volume Down or Volume Up while connecting to PC. And wait until the progress bar reaches 100%
Tested by: (see comment box)
Neil
Nico Garcia
For Invalid IMEI: Your Phone/Tablet must be rooted first
1. Hard Reset your Phone first via Stock Recovery.
2.Restore your IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
1. Hard Reset your Phone first via Stock Recovery.
2.Restore your IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
Tested by: (see comment box)
Neil
Nico Garcia
I hope this tutorial help you. Please drop a comment if something is not clear to you.
Subscribe to:
Posts (Atom)